Instruction manual

CHAPTER 2 : OPERATION GUIDE
131
Other
Functions
■ Standalone Configuration dialog box (When the CS-200 is connected)
Color Space
Select the Color Space from Lvxy, Lvu'v', LvTΔuv, XYZ or Dominant Wavelength. If Display Mode
is set to Ratio, XYZ is displayed and cannot be edited. LvTΔuv can be selected only when the
observer is set to 2°.
Display Mode
Select the setting from Absolute, Difference and Ratio. Ratio can be selected only when Color Space
is set to XYZ.
Observer
Select either 2° or 10°. User1 and User2 will be added depending on the selection. When Color
Space is set to LvTΔuv, 2° is displayed and cannot be edited.
Save Mode
Select the setting from Auto Num, Manu Num and Auto Save.
Instrument Measurement Mode
Select either One shot or Continuous.
Date & Time
Clicking the Set button displays a confirmation message. Clicking the OK button sets the date and
time settings of the instrument to those of the system.
Back Light
Select either On or Off.
Display Digit
Select either three or four digits.
Protect Data
Select either On or Off.