Instruction manual

CHAPTER 2 : OPERATION GUIDE
133
Other
Functions
2.10.14 Performing User Calibration
This procedure is available only when the instruments other than the CS-100A are connected to the computer.
When the CS-2000/2000A is connected
1. Select Instrument - User Calibration from the menu bar.
The User Calibration dialog box appears.
2. From the Edit Calibration Channel list, select a channel to calibrate.
Wavelength calibration can be performed between calibration channels CH01 and CH10 with Wave-
length and Level set to OFF.
Level calibration can be performed between calibration channels CH01 and CH10 with Level set to OFF.
3-1. To perform the wavelength calibration, click the Wave Cal button.
The Wavelength Calibration dialog box appears.