Instruction manual

CHAPTER 2 : OPERATION GUIDE
24
Starting the
CS-S10w Software
2.1.1 Starting the CS-S10w Software for the First Time
The first time the CS-S10w software starts, the “Welcome to CS-S10w” dialog box appears.
■ Welcome to CS-S10w dialog box
Document Type
Light-source Color - Normal Mode, Light-source Color - Contrast Mode, Light-source Color -
RGB Mode, Light-source Color - RGB&Contrast Mode, Object Color
Select whether to perform light-source color measurement or object color measurement. For light-
source color measurement, normal mode, contrast mode, RGB mode or RGB & contrast mode, can
be used. The measurement flow, listed items and data management method vary depending on the
mode. For details, refer to page 46.
Clicking one of the radio buttons displays the preview screen on the right.
Point Num
When the document type is set to light-source color mode, you can select the number of points used
for Multi-Point measurement. For details of Multi-Point measurement, refer to page 64.
Don’t show this dialog at startup
Leave this box unchecked to view the Welcome to CS-S10w dialog box the next time you start the
CS-S10w software. You can view this dialog box at any time by selecting View - Welcome to CS-
S10w from the menu bar.
Clicking the OK button closes the dialog box.