Instruction manual

CHAPTER 2 : OPERATION GUIDE
26
Starting the
CS-S10w Software
2.1.3 Establishing Connection with the Instrument
This procedure is available only when the instrument is connected.
To establish a connection with the instrument, select Instrument - Connect from the menu bar or click
the icon in the toolbar. All detailed information about the connection is displayed in the status window.
Connecting to the Instrument
1. Select Instrument - Connect from the menu bar.
The CS-S10w software connects to the instrument and the status of the instrument is displayed in the
status window. Once the connection is established, Disconnect appears in the Instrument menu
instead of Connect.
Disconnecting from the Instrument
1. Select Instrument - Disconnect from the menu bar.
The CS-S10w software is disconnected from the instrument and the status of the connection is dis-
played in the status window. Once the instrument is disconnected, Connect appears in the Instrument
menu instead of Disconnect.