Instruction manual

CHAPTER 2 : OPERATION GUIDE
31
Starting the
CS-S10w Software
■ Instrument Settings dialog box (When the CS-100A is connected)
Measurement Type
When the document type is set to the light-source color measurement, Radiometric is displayed.
[Selection disabled]
When the document type is set to the object color measurement, select either Reflectance or Trans-
mittance.
Measurement Speed
Select either Fast or Slow.
Calibration Mode
Select either Default or User.
■ Instrument Setting dialog box (When the CS-1000 is connected)
Measurement Type
When the document type is set to the light-source color measurement, Radiometric is displayed.
[Selection disabled]
When the document type is set to the object color measurement, select either Reflectance or Trans-
mittance.
Lens
Standard or Macro is displayed according to the status of the instrument.
[Selection disabled]