Instruction manual

CHAPTER 2 : OPERATION GUIDE
32
Starting the
CS-S10w Software
Measurement Speed
Select the setting from Auto (Normal), Auto (Fast) or Manual. When selecting Manual, specify the
number of seconds (integral time) in the box on the right between 0.040 and 60.000 seconds in
increments of 0.001 seconds.
Measurement Mode
Select the setting from Internal, External or No-Sync. When selecting Internal, specify the number
of Hertz in the box on the right between 20.00 and 250.00 Hz in increments of 0.01 Hz.
User Calibration
When any coefficient is applied to the instrument, the corresponding check box is checked. For the
setting, refer to page 114.