Instruction manual

CHAPTER 2 : OPERATION GUIDE
45
Preparing for
Measurement
2.3.5 Setting Auto Naming
1. Select Data - Auto Naming from the menu bar.
2. Specify the parameters for Auto-Naming.
■ Auto Naming dialog box
Auto Naming
Target
When this box is checked, the name of target data is assigned automatically during measurement.
Sample
When this box is checked, the name of sample data is assigned automatically during measurement.
When this box is checked, data is automatically named during measurement. Specify the format of
the name to be automatically assigned. The strings in the following tables are treated as special sym-
bols. They are replaced with the string indicating the corresponding data.
Enter a combination of these strings in the text box. Up to 40 alphanumeric characters can be used.
The following two strings are provided as sample formats and can be selected from the pull-down
combo box.
String Corresponding data
$N Automatically created number (serial number) assigned to a sample.
(The first number in the series can be specified between 0 and 999.)
$D Day of measurement
$M Month of measurement
$Y Year of measurement
$h Hour of measurement
$m Minute of measurement
$s Second of measurement
Sample#$N
$D/$M/$Y-$h:$m:$s