Instruction manual

CHAPTER 2 : OPERATION GUIDE
47
Measurement
2.4.1 Performing Normal Measurement
This procedure is available only when the instrument is connected.
1. Select Instrument - Measure from the menu bar.
The Name dialog box appears.
If Auto-Naming is activated, the Name dialog box does not appear. Skip this process and go to step 3.
To assign a comment to each piece of sample data, select Data - Data Property from the menu bar
after the measurement and type the comment in the displayed dialog box. (See page 55.)
2. Enter a name for the data.
You can assign a name and comment to each piece of sample data.
Up to 64 and 256 alphanumeric characters can be used for each name and each comment, respec-
tively. (See page 55.)
3. Click the OK button.
Data is added to the list window.