Instruction manual

CHAPTER 2 : OPERATION GUIDE
60
Measurement
2.4.9 Performing Measurement in Light-source Color - RGB
Mode
This procedure is available only when the instrument is connected.
1. Select Instrument - Measure from the menu bar.
The Name dialog box appears.
If Auto Naming is activated, the Name dialog box does not appear. Skip this process and go to step
3. To assign a comment to each piece of sample data, select Data - Data Property from the menu bar
after the measurement and type the comment in the displayed dialog box. (See page 55.)
2. Enter a name for the data.
You can assign a name and comment to each piece of sample data.
Up to 64 and 256 alphanumeric characters can be used for each name and each comment, respec-
tively. (See page 55.)
3. Click the OK button.
The RGB Measurement dialog box appears.