Instruction manual

CHAPTER 2 : OPERATION GUIDE
64
Measurement
2.4.11 Performing Multi-Point Measurement
This procedure is available only when the instrument is connected.
1. Select Instrument - Measure from the menu bar.
The Multi-Point Measurement dialog box appears.
2. Click the Measure button.
The Measure dialog box appears, and then the color of Measurement Point 1 changes to green for
Light-source Color - Normal Mode measurement or to yellow for other modes. The color of Mea-
surement Point 2 changes to red.
3. Repeat step 2 for the number of necessary points.
All measurement points other than Measurement Point 1 change to green for the Light-source Color
- Normal Mode measurement or to yellow for other modes. The data is added into the White row in
the data list modes.
4. For measurement modes other than the Light-source Color - Normal Mode measurement, select the
next setting from the Group Traits and repeat steps 2 and 3 for all group traits.
The data is added into the corresponding row in the data list.
For all group traits, the color of the measurement point for which measurement has been performed
changes to green.