Instruction manual

CHAPTER 2 : OPERATION GUIDE
70
Specifying
Target Data/
Tolerance
Entering Colorimetric Data
1. Select Data - Input Colorimetric Target from the menu bar.
The Input Colorimetric Target dialog box appears.
2. Select the color space and type the colorimetric data.
When the type of document file is set to the Light-source Color - Contrast Mode measurement,
select White or Black for Group Traits. When the type is set to the Light-source Color - RGB Mode
measurement, select Red, Green or Blue for Group Traits. When the type is set to the Light-source
Color - RGB & Contrast Mode measurement, select White, Black, Red, Green or Blue for Group
Traits. Then, enter the colorimetric data for each color.
3. Click the OK button.
The Name dialog box appears.
If Auto-naming is activated, the Name dialog box does not appear. Skip this process and go to step 5.
To assign a comment, select Data - Data Property from the menu bar after registration and type the
comment in the displayed dialog box. (See page 55.)