Instruction manual

CHAPTER 2 : OPERATION GUIDE
72
Specifying
Target Data/
Tolerance
2.5.1-c Uploading Target Data from the Instrument
This procedure is available only when instruments other than the CS-100A are connected.
The target data stored in the memory of the instrument can be uploaded to the CS-S10w software.
This procedure is enabled only when Normal Mode under Light-source Color is selected.
1. Select Instrument - Upload/Download - Upload Target from the menu bar.
2. Uploading starts.
The Target Data to upload dialog box appears. Data with a check mark will be uploaded. Uncheck
the unneeded data.
Note that the data cannot be displayed when the observer setting is different from the value currently
specified with the CS-S10w software.