Instruction manual

CHAPTER 2 : OPERATION GUIDE
77
Specifying
Target Data/
Tolerance
■ Default Tolerance dialog box
When the check box in the Use for Judgement column is checked, the item will be judged with the
upper and lower limit values. When the check box is not checked, the item will not be judged.
The numerical values can be edited regardless of the selection of the check box.
The tolerance data can be set for the colorimetric data items shown in the list window (listed items)
individually.
Optional Tolerance
Polygonal tolerance data can be specified with a desired name. Polygonal tolerance data is the data
of the tolerance range inside a polygon formed with chromaticity points that are specified on the
chromaticity diagram. When the check box to the left of the name is checked, judgement will be per-
formed with the user-defined tolerance data. When the check box is not checked, judgement will not
be performed.
Setting is available regardless of the selection of the check box.
Set
When this button is clicked, the Optional Tolerance dialog box appears. You can set the polygonal
tolerance data here.
Clear
When this button is clicked, the current user-defined tolerance data is cleared.