Instruction manual

CHAPTER 2 : OPERATION GUIDE
78
Specifying
Target Data/
Tolerance
■ Optional Tolerance dialog box
Name
Up to 64 alphanumeric characters can be entered. If no name is specified, the user-defined tolerance
data setting cannot be completed.
Chroma
Enter a chromaticity point to add. A numerical value between 0.0001 and 1.0 can be entered or
selected.
Add
When this button is clicked, the chromaticity point is added to the data list.
Spectral
Specify data to add as a spectral locus. A wavelength between 380 and 780 can be entered or
selected.
Add
When this button is clicked, the wavelengths specified at Start and End are added to the data list as
dominant wavelengths, and the intersection of the wavelengths and the spectral locus are added to
the data list as chromaticity points.
Delete
When the registered data in the data list is selected and this button is clicked, the data is deleted.
Edit
When one of the items of registered data in the data list is selected and this button is clicked, the Edit
dialog box appears to allow you to edit the data.
Group Traits for Judgement
The group trait of the selected check box is judged with the user-defined tolerance data. The select-
able group traits vary depending on the type of document file.
Load
If any tolerance data has been saved, the file (extension: .otr) can be loaded and the setting displayed
on the screen.
Save
When this button is clicked, the setting is saved in a file (extension: .otr).