Instruction manual

CHAPTER 2 : OPERATION GUIDE
84
List Window
Operation
2.6.2 List
The list command lists the data included in the folder selected in the tree. Each item is displayed accord-
ing to the list items specified on page 37.
The items x, y, u', v', Δx, Δy, Δu' and Δv' are expressed to four decimal places. Other colorimetric data is
expressed to two decimal places.
The number of decimal places can be changed. See page 43 for details.
The CS-S10w software enhances calculation accuracy by performing internal calculations with num-
bers more precise than those actually displayed. Consequently, the least significant digit displayed may
differ from that of the instrument by one digit due to rounding or color space conversion.
When the type of document file is set to the Light-source Color - Contrast Mode measurement, a piece
of data is displayed over the two rows of White and Black. When the type is set to the Light-source
Color - RGB Mode measurement, a piece of data is displayed over the three rows of Red, Green and
Blue. When the type is set to the Light-source Color - RGB & Contrast Mode measurement, a piece of
data is displayed over the five rows of White, Black, Red, Green and Blue.
The content of the list window and the function of the graphic objects in the canvas window vary
depending on the folder selected, as follows:
■ Target - Target(s)
All target data existing in the document file is listed.
Functions of graphic objects
❇
When the type of document file is set to the Light-source Color - Contrast Mode, Light-source Color - RGB
Mode, or Light-source Color - RGB & Contrast Mode, only the data from the group traits that are selected
in the group setting (see page 197) is displayed.
Chromaticity diagram,
Absolute value graph
The selected data (the last piece of data in the list when two or more
pieces of data are selected) is displayed.❇
Spectral Graph The selected data (the first piece of data in the list when two or more
pieces of data are selected) is displayed (without difference indication).❇
Trend chart/histogram All data in the list is displayed.❇
Image The image of the selected data (the first piece of data in the list when two
or more pieces of data are selected) is displayed.
Data object with target
display attribute
The numerical value of the selected data (the first piece of data in the list
when two or more pieces of data are selected) is displayed.❇
Data object with sample
display attribute
Not displayed.
Display example for the Light-source Color - Normal Mode measurement
Display example for the Light-source Color - RGB & Contrast Mode measurement