Instruction manual

CHAPTER 1 : OVERVIEW
7
Operation
Flow
1.3 Operation Flow
The shaded sections indicate functions available only when the instrument is connected.
Start the CS-S10w software.
Create a
document file.
Connect the instrument to a PC.
Light-source color Normal Mode
Normal Mode Contrast Mode
RGB &
Contrast ModeRGB Mode
Light-source color RGB Mode Object Color
Light-source color Contrast Mode
Light-source color RGB & Contrast Mode
Calibration
White calibration
Set tolerance.
Pass/fail judgement
Prepare the instrument.
Disconnect the instrument.
Exit the CS-S10w software.
Instrument settings
Select the instrument.
User calibration
Data exchange with the instrument.
Download target data.
Upload sample data.
Data management
Edit the list data/Perform statistical calculations
View Print Save
Specify target data.
Measurement
Normal
measurement
Averaged
measurement
Interval measurement
/Averaging
measurement
Measurement with
instrument key
Multi-point
Measurement
Normal
measurement
Multi-point
Measurement
Normal
measurement
Multi-point
Measurement
Normal
measurement
Multi-point
Measurement
Normal
measurement
Averaged
measurement
Averaging
measurement
Averaging
measurement
Averaging
measurement
Averaging
measurement
Measure target data.
Upload data from the instrument.
Input data manually.
Select target data from list items.
To conduct light-
source color
measurement
To conduct color difference
measurement
To conduct
absolute value
measurement
To conduct
object color
measurement
(pp. 23-24)
(p. 33)
(pp. 25-27)
(p. 28)
(pp. 133-142)
(p. 143)
(p. 66)
(p. 76)
(p. 81)
(pp. 88-89)
(pp. 98-101)
(p. 26)
(p. 46)
(p. 121)
(p. 53)