Instruction manual

CHAPTER 2 : OPERATION GUIDE

List Window

Operation

2.6.5 Re-measuring the List Data

When the type of document file is set to the Light-source Color - Contrast Mode measurement, the

Light-source Color - RGB Mode measurement or the the Light-source Color - RGB & Contrast Mode

measurement, you can select any data from the list data, measure it again, and replace the old data with

the new data.

1. When one of the items of list data is selected and highlighted, right-click the mouse to show the pop-

up menu and select Re-measure.

Or, select Instrument - Re-measure from the menu bar.

Or, when Multi-Point measurement is specified, select Instrument - Measure from the menu bar.

When the type of document file is set to the Light-source Color - Contrast Mode measurement, the

Contrast Measurement dialog box appears. When the type is set to the Light-source Color - RGB

Mode measurement, the RGB Measurement dialog box appears. When the type is set to the Light-

source Color - RGB & Contrast Mode measurement, the RGB & Contrast Measurement dialog box

appears.When the Multi-Point measurement is selected, the Multi-Point Measurement dialog box

appears.

2. Select the group trait or measurement point to re-measure and click the Measure button.

The Measure dialog box appears, and the data in the row of the selected group trait or measurement

point is replaced with the new data.

3. Repeat step 2 for other group traits or measurement points that require re-measurement.

Display sample for the Light-source Color - RGB & Contrast Mode measurement