User Guide

5.3 Specifying a Zoom Setting
5
CF2002/CF3102 5-9
Specifying Copy Settings Chapter 5
Minimizing (“Minimal” Setting)
The copy is slightly reduced (×0.930).
G
Selecting the “Minimal” setting ensures that any part of the original positioned
at the edge of the page will not be cut off in the copy.
G
The zoom ratio of the “Minimal” setting can be changed to any ratio between
×0.900 and ×0.999.
❍
For details on changing the zoom ratio, refer to “Specifying a Custom Zoom
Ratio (“CustomZoom” Setting)”.
Zooming
Any zoom ratio (between ×0.250 and ×4.000) can be specified.
G
Touch and to specify the desired zoom ratio. Each
time or is touched, the zoom ratio is increased or
decreased by an increment of ×0.001.
Custom Sizing (“CustomZoom” Setting)
Any zoom ratio (between ×0.250 and ×4.000) can be specified.
G
Use the keypad to enter the desired zoom ratio.
G
Up to two zoom ratios entered using the keypad can be stored.
Vertical and Horizontal Scaling (“X/Y Zoom” Setting)
The copy size can be changed by specifying different scaling proportions (between
×0.250 and ×4.000) for the vertical and the horizontal dimention.
To specify a Zoom setting
1
Touch [Zoom].
A screen appears, showing the available Zoom settings.
2
Select the desired Zoom setting.