Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-51
(7) Color Shift Correction
This adjustment must be made in the following case:
• Color shift occurs.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: “Machine Adjust”
→ “Color Shift Correction.”
3. Select “Cyan,” and “SINGLE.”
4. Press the Start key to let the copier produce a test pattern.
5. Check to see if the black cross at the location shown below deviates or not.
6. If it deviates, change the setting using the Up/Down key.
Setting Instructions
C4025o276AA