Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-53
(8) Leading Edge Skew Adjustment
This adjustment must be made in the following case:
• Leading edge skew occurs.
• The LPH Assy Bk has been replaced.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: “Machine Adjust”
→ “Color Shift Correction.”
3. Select “SINGLE.”
4. Press the Start key to let the copier produce a test pattern.
5. Fold the test pattern in half lengthwise.
6. Check black lines A and B for deviation.
7. If there is any deviation touch the “Black” key and change the setting using the Up/
Down key.
Setting Instructions
Check point A,B
• If the lines deviate in the C direction,
decrease the setting.
• If the lines deviate in the D direction,
increase the setting.
B
A
A
B
A
B
Direction of C Direction of D
C4025o310AA
C4025o311AA C4025o312AA