Service manual
FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-59
(14) ATDC Level Setting
This adjustment must be made in the following case:
• T/C is changed as a result of changes in environmental conditions.
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: “Image Adjust”
→ “ATDC Level Setting.”
3. Select the color to be adjusted.
4. Enter the new setting from the 10-Key Pad.
• To increase T/C, increase the setting value.
• To decrease T/C, decrease the setting value.
5. Touch “END” to validate the adjustment value.
6. Check the copy image for any image problem.