Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-61
(16) 2nd Transfer Adjust
This adjustment must be made in the following case:
• A transfer failure occurs at the trailing edge (only with plain paper).
Adjustment Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch these keys in this order: “Image Adjust”
→ “2nd Transfer Adjust.”
3. Selectthesideoftheimage(FirstsideorSecondside),onwhichthetransferfailureat
the trailing edge occurs.
4. Enter the new setting from the 10-Key Pad.
• To increase the ATVC value (in the direction of a foggier image), decrease the setting
value.
• To decrease the ATVC value (in the direction of a less foggy image), increase the setting
value.
5. Touch “END” to validate the adjustment value.
6. Check the copy image for any image problem.