Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-69
(24) Org. Detect Sensor
This adjustment must be made in any of the following cases:
• The Original Size Detecting Sensor has been replaced.
• The optional Original Size Detecting Sensors have been added.
• The copier fails to detect the size of the original correctly.
Adjustment Procedure
1. Place a blank sheet of A3 or 11”
× 17” paper on the Original Glass and lower the Origi-
nal Cover.
2. Call the Tech. Rep. Mode to the screen.
3. Touch these keys in this order: “Machine Adjust”
→ “Org. Detect Sensor.”
4. Press the Start key.
• If the adjustment has been successfully made, it completes the adjustment procedure.
• If the adjustment has turned out to be unsuccessful, check the optional Original Size
Detecting Sensors for correct installation and change the defective sensor or harness.