Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-7
2-3. Setting in the Utility Mode
Input
Meter Count
Item Purpose Setting/Precautions
Reset Mode
To register the copy
mode functions or
scanner mode func-
tions (when a printer
controller is mounted)
set when the copier is
initialized.
Set-up Mode
The copy mode or scanner mode functions set
arbitrarily on the panel are registered.
“Factory Default”
The factory-set copy mode or scanner mode
functions are registered.
The copier is initialized at the following timings:
The Power Switch is turned ON.
Panel is reset.
An Interrupt mode is canceled.
Job Memory
Input
To register the copy
mode functions being
currently set as a job
program or check or
delete a job program
that has previously
been registered.
Up to ten different job programs can be regis-
tered.
•“Copy Program Recallas a Utility function is
used to call up a program.
Purpose Setting/Precautions
To check the count of each counter or
printalistofcounters.
To print the list, load the 1st Drawer with A4
lengthwise or Letter lengthwise paper.
The copier rejects the print cycle if the drawer is
loaded with paper of any other size.