Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-9
User’s Choice: 2
Item Purpose Setting/Precautions
Specialty
Paper
To set the paper type for the 2nd
through 4th Drawers.
The default setting is Standard (plain
paper). (Standard, High Quality Paper,
Single Sided Only, Specialty)
Priority exit
tray
Set the priority exit tray for each
of the copier print, PC print, and
the Internet Fax print.
When the FN-116 is mounted
The default settings are as follows (as
set with the corresponding number
shown on the display).
• Internet: 3 (3rd Drawer)
• Print (PC print): 2 (Elevator Tray)
• Copy: 2 (Elevator Tray)
Intelligent
Sorting
To select whether to enable or
disable the function that auto-
matically switches between Sort
andNon-Sortaccordingtothe
number of originals and the
number of copy sets to be made.
• The default setting is Yes.
Yes No
Criss Cross
Mode
To select whether to enable or
disable the crisscross sorting
function that stacks sorted copy
sets in a crisscross manner, i.e.,
one set stacked lengthwise on
top of another set stacked cross-
wise.
• The default setting is Yes.
Yes No
Priority
Device
To set the print timing for the PC
print jobs received.
• The default setting is Copier.
Copier: After the reception of all data
Printer: After the reception of data for
each page
ACS Juge-
ment Level
Adjust.
To set the criterion level to dis-
criminate between a colored
original and a black-and-white
original in the Auto Color (ACS)
mode.
• Five levels are available to choose
from and the default setting is 3.
Near Black 1 2 3 4 5 Near Full Color
2in1, 4in1,
Booklet Copy
Zoom
To select, when 2in1, 4in1, or
Booklet is selected, whether or
not to automatically call up the
zoom ratio optimum for the
mode.
• The default setting is Presets (call up).
Presets No Presets
Auto-select
Paper for
Small
To select whether or not to
enable copying when an origi-
nal, whose size falls outside the
detectable range, is loaded in
the Auto Paper mode and to
select the paper source to be
used.
• The default setting is OFF (disable
copying).
OFF ON
• The default setting for the paper
source is the 1st Drawer.