Service manual
FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-10
Copy Program Recall
Unit Life Indicator
Unit Change
Item Purpose Setting/Precautions
Original
4in1 Copy
Order
To select the layout of copy
images in the 4in1 mode.
The default setting is as follows:
Centering
To select whether to center the
image with respect to the paper.
• The default setting is Yes.
Yes No
• Used when the size of the original is
smaller than that of the paper selected
for use.
Purpose Setting/Precautions
To call up a program registered
through Job Memory Input.
• Select the program number.
• If the copier is not equipped with capabilities
(e.g., stapling) that were provided when the pro-
gram was registered, calling up that particular
program is disabled.
Purpose Setting/Precautions
To check each unit for life. • The life indicator of each unit is displayed.
• Allows a list of counter counts to be printed.
Purpose Setting/Precautions
To clear the life counters for the Trans-
fer Roller Unit and Paper Dust
Remover/Ozone Filter.
When “User” is selected for “Trans-
ferRollerUnit” and “Paper Powder
Filter/Ozone Filter” available from
“Unit Change” of “System Input”
under “Tech.Rep.Mode.”
When the life value is reached.
When the unit is replaced before its
life.
• After the Transfer Roller Unit or the Paper Dust
Remover/Ozone Filter has been replaced with a
new one, enter the Utility mode with the Right
Door left open.
• The “Unit Change” key will appear on the
screen.
• Touch the “Unit Change” key and clear the life
counter.
43
21