Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-11
Admin. Mode
• Entering the 4-digit administrator number set in the Tech. Rep. mode will allow you to
enter the Admin. Mode (default value: 0000).
Admin. set
Item Purpose Setting/Precautions
Top E ra se
To set the leading edge erase
amount of the paper.
• The default setting is 5 mm.
5mm 7mm
Disable
Sleep Mode
To display the option of “No”
for the Sleep setting screen
available from User's Choice
1.
• The default setting is No.
Ye s No
Full Bleed
paper
selection
To establish the full bleed
paper size.
• The default setting is 305 x
457mmor12x
18.
Metric areas: 311 x 457 mm 305 x 457 mm
Inch areas: 12-1/4 x 18 12x18
Language
Selected
To select the language of the
LCD display messages.
The counter outputs will be
produced in the language
selected.
The language options depend on the market-
ingareaselectedin“Marketing Area” avail-
able from “System Input” under Tech. Rep.
Mode.