Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-13
Expert Mode
Item Purpose Setting/Precautions
Thick Paper
and OHP Film
Image Density
To fine-adjust density of
printed images of each color
for thick paper and OHP trans-
parencies.
The fine-adjustment can be made over a
range of a total of five steps, two darker
levels and two lighter levels around the
standard central level. (This setting is not
affected by image stabilizer control.)
Color Shift
Correction (C)
To make an automatic or man-
ual correction of color shift.
(Automatic correction)
• Pressing the Start key will let the copier
produce a test pattern according to the
current color shift condition.
(Manual correction)
• Check the test pattern for color shift
amount in each of the X, Y, and ? direc-
tions, and fine-adjust using the Up/
Down key.
• Fine-adjust in X and Y directions for
color shift of cyan, magenta, and yellow.
• For color shift of black, adjust tilt in the
blacklineontheleadingedgein?direc-
tion.
Since the test pattern is produced on
A3L or 11
× 17, or A4C or 8-1/2 × 11,
the press of the Start key will not be
accepted unless the paper source is
loaded with any of these paper sizes
(the Start key lighting up red).
Color Shift
Correction (M)
Color Shift
Correction (Y)
Color Shift
Correction
(Bk)