Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-16
3. TECH. REP. MODE
3-1. Tech. Rep. Mode Function Setting Procedure
NOTE
Ensure appropriate security for Tech. Rep. mode function setting procedures. They
should NEVER be shown to any unauthorized person not involved with service jobs.
<Procedure>
1. Press the Utility key.
2. Press the Meter Count key.
3. Press the following keys in this order.
Stop
0 0 Stop 0 1
4. The Tech. Rep. Mode menu will appear.
<Exiting>
Touch t he Fin. Timekey.
<Changing the Setting Value in Tech. Rep. Mode Functions>
UsetheIDkeytochangethe+signto-sign,orviceversa.
Use the Up/Down key to enter or change the setting value.
Use the 10-Key Pad to enter the setting value. (To change the setting value, first press
the Clear key before making an entry.)