Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-29
System Input
Item Purpose Setting/Precautions
Marketing
Area
To make the va rio us
settings (language,
paper size, fixed
zoom ratios, etc.)
accordingtothe
applicable marketing
area.
Upon setup
Select the applicable marketing area and touch
“END” to set the marketing area.
MSJ MC ME
Org. Detect
Option Sensor
To let the copier rec-
ognize an optional
Original Size Detect-
ing Sensor when one
is mounted.
When an optional
sensor is mounted.
After the optional Original Size Detecting Sensor
has been mounted, select “Set.”
Set Unset
After the sensor has been mounted, perform “Org.
Detect Sensor” of “Machine Adjust.”
Serial # Input
To register the serial
numbers of the
copier and options.
The numbers will be
printed on the list
output.
Upon setup.
When the IR Unit
is replaced.
• The IR and printer have been separately adjusted
and it is necessary to load the adjustment and
other data of the IR side when the IR is con-
nected to the printer.
• The data is loaded at the timing when the Power
Switch is turned OFF and ON after the IR serial
number has been entered and “END” has been
touched on the “Serial # Input” screen.
Tel. # Input
To enter the tele-
phone number of the
service contact that
will appear on the
Touch Panel when a
malfunction occurs in
the copier.
Upon setup.
Enter the telephone number (19 digits) from the 10-
Key Pad. Use the Interrupt key to enter a hyphen
“-.”
FLS Paper
To set the size for
FLS paper.
Upon setup.
When the FLS
paper size is
changed.
Select the size from among the following four.
F: 330.2 mm F: 330 mm F: 330.2 mm F: 330 mm
C: 203.2 mm C: 210 mm C: 215.9 mm C: 220 mm
Book Erase
(Center)
To change the cen-
ter erase width in
Book copying.
As required by the
user.
The setting range is 2 to 30 mm, with 15 mm being
the default.