Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-30
Item Purpose Setting/Precautions
Peripheral
Setting
To set the type of the con-
troller.
When setting up the con-
troller
See the Setup Instructions for the Controller.
Unit Change
• To select who is to
replace a unit.
• When the unit life arrives,
the warning display is
intended for the specific
person who is going to
replace the unit.
• When “User” is selected:
Copying is inhibited.
• When “Service” is
selected: Life warning.
Upon setup
The following are the default settings:
Toner Cartridge: User
Waste Toner Bottle: Service
Fusing Unit: Service
Imaging Unit: Service
Transfer Roller Unit: Service
Paper Powder Filter/Ozone Filter: Service
Punch Scraps Box: Service
Memory
Recall
To select whether to display
theoptionof“Memory
Recall” for “User's Choice
1” of “Utility.”
The default setting is Enable.
Enable Disable
Hard Disk
To configure the copier as
necessary when a hard
disk is mounted.
The default setting is Unset.
Set Unset