Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-31
Counter
To clear the counts of two or more counters within a group or across different groups at
once, touch Counter Reset, select the specific counters to be cleared, and touch END.
Two or more counters can be selected.
Item Purpose Setting/Precautions
Life
To ch ec k the
number of
hours or
times each
of the differ-
ent mainte-
nance parts
has been
used or to
clear the
count of
each
counter.
When
each of
the main-
tenance
parts is
replaced.
To clear the count of a counter, select the specific part and press
the Clear key.
If a counter is cleared mistakenly, press the Interrupt key, which will
undo the clearing operation.
It is not possible to clear the count of the counters for the Fusing
Unit and IU, which are provided with a new unit detection function.
<1>
Fusing Unit: Number of times a sheet of paper is fed through
Transfer Roller Unit: Number of times a sheet of paper is fed
through
Transfer Belt Unit: Number of times a sheet of paper is fed through
The number of copies made (A) is compared with the number of
hours through which the unit has been energized translated to the
equivalent number of copies made (B) and (A) or (B), whichever
reaches the life value, is detected.
Paper Powder Filter/Ozone Filter: Number of times a sheet of paper
is fed through
1st.: Number of sheets of paper fed from the 1st Drawer
2nd.: Number of sheets of paper fed from the 2nd Drawer
3rd.: Number of sheets of paper fed from the 3rd Drawer
4th.: Number of sheets of paper fed from the 4th Drawer
<2>
Cyan IU: Period of time over which the Cyan Developing Unit has
been used.
Magenta IU: Period of time over which the Magenta Developing
Unit has been used.
Yellow IU: Period of time over which the Yellow Developing Unit has
been used.
Black IU: Period of time over which the Black Developing Unit has
been used.
The period of time over which the PC Drum has been turned (A) is
compared with the period of time over which the Developing Roller
has been rotated translated to the period of time over which the PC
Drum has been turned (B) and (A) or (B), whichever reaches the life
value, is detected.
LCC Parts 1: Number of sheets of paper fed from the LCC
LCC Parts 2: Number of sheets of paper fed from the LCC
ADF Feed: Number of sheets of paper fed through the take-up sec-
tion of the ADF
ADF Rev.: Number of sheets of paper fed through the turnover unit
of the ADF
Sorter/Finisher: Number of sheets of paper fed out of the Sorter/
Finisher
Staple: Number of stapling sequences performed
Punch: Number of hole-punch sequences performed
Paper Fold: Number of folding sequences performed