Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-38
RD Mode
• Make the settings necessary when a Data Terminal is mounted. (For details, see Service
Manual for Data Terminal.)
Item Purpose Setting/Precautions
e-mail / Modem
To select the type of
the RD system.
Select either “e-mail” or “Modem.”
ID Code
To register the Tech.
Rep. ID code and per-
form a maintenance
start transmission.
Enter a 7-digit code from the 10-Key Pad
(0000001 to 9999999).
<Registration>
When the ID code is entered, it is registered.
<Maint. Start>
Touch the ID Code Key.
DT
Setting
To make t he DT set-
ting and perform the
initial transmission.
<DT Setting>
Set “Password,”“DT-ID,” and “TEL No.”
When “e-mail” is selected for the ID Setting,
TEL No. is the e-mail address.
<Initial Transmission>
Press the Initial Transmission key to execute the
initial transmission to the Center and the copier
equipped with the Data Terminal is registered
with the Center (only if “Modem” is selected for
“System Selection”).
Date/Time
Input
To set the date and
time-of-day.
Enter the date (month, day, and year) and time-
of-day from the 10-Key Pad. Pressing the Set
key will start the clock.
Common DT
To set tone or pulse
and automatic recep-
tion.
The default settings are tone and disable auto-
matic reception.
RAM Clear
Toclearthedatafor
the Center.
The following types of data are cleared:
• ID Code, DT Setting, Date/Time Input, and
Common DT.