Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 SWITCHES ON PWBs/TECH. REP. SETTINGS
02.06.05
S-44
Admin. Choice
Purpose Setting/Precautions
To set whether or
not the Plug-In
Counter, Data
Controller, and
Vendor are
installed.
<Key Counter>(Plug-In Counter)
• Default setting: Unset
• If “Set” is selected, select the counting method applicable when an
output is produced in color or mono color.
If “Mode 1” is selected for “Total Counter”
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
If “Mode 2” is selected for “Total Counter,”“Specified sizes” is
selected for “Size Counter,” and the paper used is the specified size
Mode 1: 2 counts per 1 copy cycle
Mode 2: 4 counts per 1 copy cycle
Mode 3: 6 counts per 1 copy cycle
Mode 4: 8 counts per 1 copy cycle
Mode 5: 10 counts per 1 copy cycle
If “Mode 2” is selected for “Total Counter,”“Sizes other than those
specified” is selected for “Size Counter,” and the paper used is the
specified size or one other than those specified
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
<Admin. Unit> (Data Controller)
• Default setting: Unset
<Vendor>
• Default setting: Unset
• If “Set” is selected, select Coin Vendor or Card Keeper.