Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 1 8
(3) 3rd Drawer Paper Take-Up Misfeed (PF-118)
<Detection Timing>
<Action>
Type Description
Paper take-up failure
detection
The leading edge of the paper does not block the 3rd Drawer
Paper Take-Up Sensor (PC1) even after the lapse of a given
period of time after the 3rd Drawer Paper Take-Up Clutch (CL1)
has been energized.
3rd Drawer size error
detection
The 3rd Drawer Paper Take-Up Sensor (PC1) is not unblocked
even after the lapse of a given period of time after it has been
blocked by the paper.
Detection of paper left
in 3rd Drawer
The 3rd Drawer Paper Take-Up Sensor (PC1) is blocked when the
Power Switch is turned ON, a door or cover is opened and closed,
or a misfeed or malfunction is reset.
Relevant Electrical Parts
3rd Drawer Take-Up Sensor (PC1)
3rd Drawer Take-Up Clutch (CL1)
3rd Drawer Take-Up Motor (M1)
3rd Drawer Control Board (PWB-A)
Step Action Ref. Page
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Initial check items T-12 ——
2 PC1 I/O check T-4 to T-10 — 2-D
3 CL1 operation check T-2 PWB-A PJ3A-14B (ON) 2-I
4 M1 operation check T-3
PWB-A PJ5A-1 to 4
(Pulse Output)
2-A
5 Change PWB-A. —— —