Service manual
FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 1 9
(4) LCC Paper Take-Up Misfeed (PF-121)
<Detection Timing>
<Action>
Type Description
LCC paper take-up
failure detection
The LCC Exit signal does not turn ON even after the lapse of a
given period of time after an LCC paper take-up request has been
issued.
The LCC Registration Sensor (RSEN) is not blocked even after the
lapse of a given period of time after an LCC paper take-up request
has been issued.
LCC size error detec-
tion
The 2nd Drawer Paper Take-Up Sensor (PC101) is not blocked
even after the lapse of a given period of time after it has been
blocked by the paper.
Detection of paper left
in LCC
The LCC Registration Sensor (RSEN) or 2nd Drawer Paper Take-
Up Sensor (PC101) is blocked when the Power Switch is turned
ON, a door or cover is opened and closed, or a misfeed or mal-
function is reset.
Relevant Electrical Parts
LCC Paper Take-Up Sensor (PPS0)
LCC Registration Sensor (RSEN)
2nd Drawer Paper Take-Up Sensor (PC101)
LCC Paper Take-Up Clutch1 (P1CL)
LCC Paper Take-Up Clutch2 (P2CL)
LCC Separator Clutch (BCL)
LCC Registration Clutch (RCL)
LCC Control Board (PWB-A)
Step Action Ref. Page
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Initial check items T-12 ——
2 PPS0 I/O check T-4 to T-10 — 7-D
3 RSEN I/O check T-4 to T-10 — 7-E
4 PC101I/Ocheck T-4toT-10 — 6-H (Copier)
5 P1CL operation check T-2 PWB-A CN7A-8 (ON) 7-B
6 P2CL operation check T-2 PWB-A CN7A-6 (ON) 7-B
7 BCL operation check T-2 PWB-A CN7A-2 (ON) 7-C
8 RCL operation check T-2 PWB-A CN7A-4 (ON) 7-C
9 Change PWB-A. —— —