Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 2 3
(8) Vertical Transport Misfeed
<Detection Timing>
<Action>
Copier
Type Description
Vertical Transport mis-
feed detection
(Copier)
The Synchronizing Roller Sensor (PC14) is not blocked even after
the lapse of a given period of time after the 2nd Drawer Paper
Take-Up Sensor (PC101) has been blocked by the paper.
(PF-118)
The 2nd Drawer Paper Take-Up Sensor (PC101) is not blocked
even after the lapse of a given period of time after the 3rd Drawer
Paper Take-Up Sensor (PC1) has been blocked by the paper.
(PF-118)
The 3rd Drawer Paper Take-Up Sensor (PC1) is not blocked even
after the lapse of a given period of time after the 4th Drawer Paper
Take-Up Sensor (PC1) has been blocked by the paper.
(PF-121)
The 2nd Drawer Paper Take-Up Sensor (PC101) is not blocked
even after the lapse of a given period of time after an LCC paper
take-up request has been issued.
Relevant Electrical Parts
2nd Drawer Paper Take-Up Sensor (PC101)
Synchronizing Roller Sensor (PC14)
2nd Drawer Paper Take-Up Clutch (CL101)
2nd Drawer Paper Take-Up Motor (M101)
2nd Drawer Control Board (PWB-A)
Step Action Ref. Page
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Initial check items T-12 ——
2 PC101I/Ocheck T-4toT-10 — 6-H
3 PC14 I/O check T-4 to T-10 — 2-I
4 CL101 operation check T-2 PWB-A PJ13A-14B (ON) 5-I
5 M101 operation check T-3
PWB-A PJ5A-1 to 4
(Pulse Output)
6-G
6 Change PWB-A. —— —