Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 6 2
(64) C12C0: Hard Disk Error
(65) C12CB: Hard Disk Error
<Detection Timing>
<Action>
(66) C12CC: Hard Disk Error
<Detection Timing>
<Action>
Malfunction Code Description
C12C0
Unable to communicate between the hard disk and Image Control
Board (PWB-F).
C12CB Data transfer from the hard disk is faulty.
Relevant Electrical Parts
Image Control Board (PWB-F) Hard Disk
Step Action
Ref.
Page
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1 Reinstall the hard disk. —— —
2 Change Hard Disk. —— —
3 Change PWB-F. —— —
Malfunction Code Description
C12CC Unformatted hard disk is connected.
Relevant Electrical Parts
Image Control Board (PWB-F) Hard Disk
Step Action
Ref.
Page
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1
Select “Tech. Rep. Mode”
→
“Machine Adjust” → “Memory/
Hard Disk Adjust”
→ “Hard
Disk Format”
—— —
2 Change Hard Disk. —— —
3 Change PWB-F. —— —