Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 6 5
(80) C13D1: Cyan IU EEPROM access error
(81) C13D2: Magenta IU EEPROM access error
(82) C13D3: Yellow IU EEPROM access error
(83) C13D4: Black IU EEPROM access error
<Detection Timing>
<Action>
Malfunction Code Description
C13D1
Setting 1 “Start Flag” of GA register does not become ready even
after the lapse of a predetermined period of time after a cyan IU
EEPROM access control has been executed.
C13D2
Setting 1 “Start Flag” of GA register does not become ready even
after the lapse of a predetermined period of time after a magenta
IU EEPROM access control has been executed.
C13D3
Setting 1 “Start Flag” of GA register does not become ready even
after the lapse of a predetermined period of time after a yellow IU
EEPROM access control has been executed.
C13D4
Setting 1 “Start Flag” of GA register does not become ready even
after the lapse of a predetermined period of time after a black IU
EEPROM access control has been executed.
Relevant Electrical Parts
IO Board (PWB-IO) IU C/M/Y/Bk
Step Action
Ref.
Page
WIRING DIAGRAM
Control Signal
Location
(Electrical
Component)
1
Clean the connection between
the IU and copier if dirty.
—— —
2 Reinstall IU C/M/Y/Bk. —— —
3 Change IU C/M/Y/Bk. —— —
4 Change PWB-IO. —— —