Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 7 8
(4) IR System: fog
<Typical Faulty Image>
<Troubleshooting Procedure>
Section Step Check Item Result Action
Original 1 Original is damaged or dirty. YES Change original.
Original Cover 2 Original Pad is dirty. YES Clean.
3 Original Cover does not lie flat. YES Change Original Cover if it
is deformed or hinges are
broken.
Original Glass 4 Original Glass is dirty. YES Wipe the surface clean with
asoftcloth.
Shading sheet 5 Shading sheet is dirty. YES Wipe the surface clean with
asoftcloth.
Mirror, lens,
Exposure
Lamp, and
reflectors
6 Mirror is dirty. YES Clean.
Lens is dirty. YES Clean.
Exposure Lamp is dirty. YES Clean.
Reflectors are dirty. YES Clean.
Photo/Density 7 The problem is eliminated
when the image is produced in
the Manual exposure setting.
NO Try another exposure level
in Manual.
8 The problem has been elimi-
nated through the checks of
steps up to 7.
NO Change Scanner Assy.
Change CCD Unit.
4011T004AA