Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 7 9
(5) IR System: blurred image, blotchy image
<Typical Faulty Image>
<Troubleshooting Procedure>
Section Step Check Item Result Action
Original 1 Original does not lie flat. YES Change original.
Original
Cover
2 Original Cover does not lie flat. YES Change Original Cover if it is
deformed or hinges are bro-
ken.
Original
Glass
3 Original Glass tilts. YES Position Original Glass cor-
rectly. Check original loading
position.
IR 4 Scanner is not aligned with the
2nd/3rd Mirrors Carriage.
YES Perform “Focus Positioning of
the Scanner and 2nd/3rd Mir-
rors Carriage” and “Scanner
Position Adjustment.”
5 The problem has been elimi-
nated through the checks of
steps up to 4.
NO Change Scanner Assy.
Change CCD Unit.
4011T046AA