Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 GENERAL
02.06.05
G-5
3. PRECAUTIONS FOR USE
3-1. To ensure that the copier is used in an optimum condition
• Never place a heavy object on the copier or subject the copier to shocks.
• Insert the power plug all the way into the outlet.
• Do not attempt to remove any panel or cover which is secured while the copier is making
copies.
• Do not turn OFF the copier while it is making copies.
• Provide good ventilation when making a large number of copies continuously.
• Never use flammable sprays near the copier.
• If the copier becomes inordinately hot or produces abnormal noise, turn it OFF and
unplug it.
• DonotturnONthepowerswitchatthesametimewhenyouplugthepowercordintothe
outlet.
• When unplugging the power cord, do not pull on the cord; hold the plug and pull it out.
• Do not bring any magnetized object near the copier.
• Do not place a vase or vessel containing water on the copier.
• Be sure to turn OFF the power switch at the end of the workday or upon power failure.
• Use care not to drop paper clips, staples, or other small pieces of metal into the copier.
3-2. Operating Environment
The operating environmental requirements of the copier are as follows.
• Temperature:10to30°C,
50 to 86 ° F
• Humidity: 25 to 85 % RH
• Rate of temperature change: 10 °C/h,
50 ° F/h
• Rate of humidity change: 20 % RH/h
3-3. Power Requirements
The power source voltage requirements are as follows.
• Voltage fluctuation: AC110, 120, 220, 240 V
±10 % (copying performance assured)
(127 V areas only; between -10 % and +6 %)
(paper feeding performance assured)
• Frequency fluctuation: 50/60 Hz ±0.3 %
3-4. Note
• It is prohibited to copy paper and hard currencies, government securities, and municipal
bonds (even when they are stamped as “Sample”).
• For fear of infringement of copyright, it is also prohibited to copy copyrighted works,
including books, music, works of art, maps, drawings, motion pictures, and photos except
whenthecopyistobeusedonlypersonally.
+10 %
-15 %