Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 8 3
(9) IR System: distorted image
<Typical Faulty Image>
<Troubleshooting Procedure>
Section Step Check Item Result Action
Installation 1 IR is installed on a level sur-
face if mounted without any
rack.
NO Reinstall.
Rack is installed on a level sur-
face.
NO Reinstall.
The Rack is tilted with a lot of
play.
YES Adjust rack leg height.
2nd/3rd
Mirrors Car-
riage
2 Scanner Assy is not properly
aligned with 2nd/3rd Mirrors
Carriage.
YES Readjust with the Scanner/
Mirrors Carriage Positioning
Jigs.
Scanner
Motor
3 Scanner Motor turns smoothly. NO Change belt.
Change Scanner Motor.
4 The problem has been elimi-
nated through the checks of
steps up to 3.
NO Change Scanner Assy.
Change CCD Unit.
4011T045AA
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE