Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 8 4
(10) IR System: low image density, rough image
<Typical Faulty Image>
<Troubleshooting Procedure>
Section Step Check Item Result Action
Original 1 Original sticks to Original
Glass.
YES Reposition original.
Original
Glass
2 Original Glass is dirty. YES Wipe the surface clean with a
soft cloth.
Shading
sheet
3 Shading sheet is dirty. YES Wipe the surface clean with a
soft cloth.
Mirror, lens,
Exposure
Lamp, and
reflectors
4 Mirror is dirty. YES Clean.
5 Lens is dirty. YES Clean.
6 Exposure Lamp is dirty. YES Clean.
7 Reflectors are dirty. YES Clean.
8 The problem has been elimi-
nated through the check of
step 7.
NO Clean Exposure Lamp.
→Change Scanner Assy.
→Change CCD Unit.
4011T003AA