Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T- 8 6
(12) IR System: blank copy, black copy
<Typical Faulty Images>
<Troubleshooting Procedure>
Section Step Check Item Result Action
Cable
connecting IR
and printer
1 Connector is connected
properly with no pins bent.
NO Reconnect.
Image
Processing
Board
(PWB-C)
2 Connectors on the Image
Processing Board are con-
nected properly.
NO Reconnect.
CCD Unit 3 Connectors of the CCD Unit
are connected properly.
NO Reconnect.
Test Print
(Tech.Rep.Mode)
4 The problem is eliminated
as checked with the image
on a test pattern produced.
NO Change I/F connection
cable.
Image
Processing
Board
(PWB-C)
5 The problem is eliminated
after the I/F connection
cable has been changed.
NO Change Image Processing
Board.
Blank copy Black copy
4011T036AA
4011T035AA