Service manual
FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T-1 13
Machine
Adjust
→Color
Shift Cor-
rection
(Tech. Rep.
MOde)
11 Check the specific color in
which color shift occurs.
YES Perform “Color Shift Correc-
tion.” If color shift is not cor-
rected even with a correction
of ± 1 dot, go to next step.
12 The problem has been elimi-
nated through the checks of
steps up to 11.
NO Change Image Transfer Roller
Unit.
→Change Image Transfer
Belt Unit.
→Change PIC Board.
Section Step Check Item Result Action