Service manual
FrameMaker Ver5.5E(PC) CF3102/CF2002 TROUBLESHOOTING
02.06.13
T-1 17
(37) Printer 4-Color: brush effect, blurred image
<Typical Faulty Images>
<Troubleshooting Procedure>
Section Step Check Item Result Action
Paper 1 Paper is damp. YES Change paper to one just
unwrapped from its package.
Install Paper Dehumidifying
Heater.
2 Paper type does not match the
setting on the paper type set-
ting dial.
YES Change the setting of the
paper type setting dial.
Fusing Unit 3 Fusing Entrance Guide Plate is
dirty.
YES Clean.
4 Fusing Belt is dirty or
scratched.
YES Change Fusing Unit.
Machine
Adjust
→Fuser
Speed
(Tech. Rep.
Mode)
5 Changing fusing speed elimi-
nates the problem of brush
effect and blurred image.
NO Change Fusing Unit.
Blurred imageBrush effect
4011T046AA4004T004AA