Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 MAINTENANCE
02.06.05
E-5
2. DISASSEMBLY/REASSEMBLY AND CLEANING
(1) Cleaning of the Paper Take-Up Roller
(2) Replacing of the Paper Take-Up Roller
(3) Cleaning of the Paper Separator Roller
1. Slide out the drawer.
2. Using a soft cloth dampened with alcohol, wipe
the Paper Take-Up Roller clean of dirt.
4658D005AA
1. Slide out the drawer.
2. Lock the Paper Lifting Plate into position.
3. Snap off one C-clip from the Paper Take-Up
Roller Assy.
4. Slide the Paper Take-Up Roller Assy to the rear
and take its shaft off the front bushing.
4658D008AA
5. Snap off one C-clip and remove the Paper Take-
Up Roller.
6. Remove the Paper Separator Roller Assy. [See
(4) Replacement of the Paper Separator Roller
Assy.]
7. To reinstall, reverse the order of removal.
8. Select “Tech. Rep. Mode”
→ “Counter” → “Life”
and clear the count of “1st” or “2nd.”
4658D009AA
1. Slide out the drawer.
2. Remove two screws and the Paper Separator
Roll mounting bracket assy.
4658D002AA