Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-12
(3) Removal of the Image Control Board
1. Remove the Rear Cover.
2. Remove eight screws at the I/F cable connection
(five on the side face and three on the rear face of
the copier).
4334O014AA
4334O015AA
<Copier Side Face>
<Copier Rear Face>
3. Slide the Image Control Board to the left off the
copier.
Remount IC202 and upgrade the firmware after
the replacement.
4334O016AA