Service manual

FrameMaker Ver5.5E(PC) CF3102/CF2002 DIS/REASSEMBLY, ADJUSTMENT
02.06.010
D-26
11. Secure the front and rear pulleys using one screw
each.
4025D058AA
12. Mount the Scanner Motor Assy.
D-19
4025D117AA
13. Wind the bead end of the cable around pulley C
and pulley B, then hook the bead onto the Adjust-
able Anchor.
Front
4002D008AA
Pulley C
Pulley B
14. Wind the hook end of the cable around pulley A
and pulley B.
4002D009AA
Pulley B
Pulley A
15. Fit the hook end of the cable to the spring and
then hook the spring to the catch in the frame.
NOTE
• Select the appropriate catch in the frame (from
among three) so that the spring measures 64.2
mm ±1 mm.
4002D119AB